![]() I personally use GMSH as we can create 2D and 3D meshes as well as having control over the element arrangement. To create a mesh, we need meshing software such as GMSH. Now we have our CAD, we need to turn it into a mesh we can use in BERNAISE. Select your sketch and extrude, for example 0.2 mm which is 200 μm. Exit the 2D sketch and select the extrude tool. Now we need to extrude the 2D sketch into 3D.The straight line, channel width, should be 500 μm assuming both circles are centred. Then draw straight lines on the axis and crop one side of the circle. Select the circle tool and draw a circle with a radius of 5 mm and a smaller circle with a 4.5 mm radius, 0.5 mm smaller. For simplicity, let’s create a 2D sketch. Once the document is set up correctly, we need to create a sketch.I personally set the document settings to milli-metres. We need to ensure we set the units for the document up correctly so that when we draw our model, it is represented correctly.The CAD program I use is AutoDesk Fusion as it is free to use for personal and hobby use. For this tutorial, we are going to use a curved channel for simplicity, created in a CAD program as well as labelling the boundaries later. We need a model to simulate our CFD where computer-aided design (CAD) allows for particular control of structures and features in the flow path. Creating a Microfluidic Computer-Aided Design (CAD) However, the layout in BERNAISE is straight forward with the definitions that novice users can implement problems. This process is without a graphical user interface unlike other popular CFD simulation programs. Here we are going to use a CFD template and add the values of the mesh and parameters of the CFD problem using BERNAISE. Currently this blog has investigated Navier-Stokes problems with Understanding The Navier-Stokes Solvers and Phase-Field problems with Microfluidic Dro plet Formation using BERNAISE, Binary ElectRohydrodyNAmIc SolvEr, which runs on FEniCS, Finite Element Computational Software. These settings can differ greatly between CFD programs and may differ in the units used to define the problems. ![]() Setting up a computational fluid dynamic (CFD) problem can be daunting with all the different parameters and solvers available. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |